HomePlans ShopClinker Ply Dinghies

Winchelsea 2.2 Clinker Plywood Plans from
Winchelsea 2.2 Clinker Plywood Plans from
Winchelsea 2.2 Clinker Plywood Plans from
Winchelsea 2.2 Clinker Plywood Plans from
Winchelsea 2.2 Clinker Plywood Plans from

Winchelsea 2.2 Clinker Plywood Plans from

£25.00

Product information

The Winchelsea 2.2 is available as a kit and as DIY plans. It is a little smaller than the Winchelsea 8 and the planks can be cut from a standard sheet of 2.44m x 1.22m plywood - no scarfing required. It is different from its larger sister as it does not have a long keel which is replaced by a flat keel plank onto which a length of timber and a skeg are fitted. The open edge of the stem is capped with thin strips of wood that are carefully bent round to join at the keel.
The flat keel plank makes for an easier build but it is still built in the same way - over a mould. However, it could be built using stitch & tape if you don’t mind the stitch holes. If you’re painting your hull inside and out, this is not a problem but, if you want to varnish your hull then don’t use it.

 

Technical specifications

Code: W22A3
Condition: New