HomeDIY KitsDinghy Kits

Winchelsea 10 Kit

£555.00

Product information

Loa 3.04m (10’ – 0”)
Beam 1.37m (4’ – 6”)
Draft 0.178m (0’ – 7”)
Approx. Dry Weight 30kgs (130lbs) Rowing Version

 The "WINCHELSEA 10". The pictures show two great examples from first time builders. A very similar looking larger version of her 8’ sister, continuing with the clinker style hull, 6 planks per side, multi-purpose Rowing/Motor or Sailing dinghy that can be used as a tender to a yacht or larger vessel or for a day of fun on the local water. She is 10’ - 0" in length, 4’ - 6" beam and designed to be as light as possible for her size and construction. Although she could be carried on the roof rack of a large car, she is far more suited to a small trailer. She will also take a small lightweight outboard 2hp - 3.5hp for motoring up and down the local river, canal, harbour or around the local lake. Electric outboards are an option with this boat too. The plans detail the transom outboard pad to add strength. Built in buoyancy can be added by enclosing the seats or inflatable buoyancy bags can be used. This kit is available for rowing or a motor.

Kit Options

Full Plywood Epoxy Kit  -  £895.00

Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish and a set of oars or a motor.

Pack 1. Wood & Plywood pack. Planks, keel plank, stem and transom. Mould, centre support for the build frame, ready for assembly. The wood for the seats and trim is also included.

Pack 2. Epoxy Materials Pack. All the epoxy materials required – resin, glue fillet additive, FG tape, gloves and mixing sticks.

Pack 3. “F” clamps x 5, a few cable ties and other sundry items.

Contains all the plywood parts, planks, bottom panel, frame and transom with the stitch holes drilled, ready for assembly.

Plywood Only Kit  -  £555.00

Contains all the plywood parts, planks, bottom panel, frame and transom with the stitch holes drilled, ready for assembly.

Technical specifications

Code: WN10POK